• Address:
    Amrahia Baron Junction,
    Off Adenta - Dodowa - RD

  • Call Us:
    0203626592, 0501291547
    sales@iridakroof.com

Iridak Light Steel Frames

How Iridak Light Steel Frame Can Help Prevent Mold.

Mold growth isn’t limited to old buildings. Wondering how to prevent mold in a new construction project? Iridak Light Steel Frame can be key to prevention.

Mold growth can be a serious concern for owners and tenants in older buildings — and for good reason. Mold is known to contribute to a variety of health-related issues. What’s discussed less frequently, however, is that mold growth isn’t limited to older buildings. New construction can harbor potentially harmful fungi, too.

To keep future building occupants safe, it’s important to consider the possibility of mold from the beginning of your project and choose a construction material that can help guard against it, such as Iridak Light Steel Frame (ILSF).

 

Cause for Concern  

Molds are types of fungi that release spores into the air to reproduce. When mold spores find the right conditions — dampness, oxygen, and an organic source to feed on — they grow and mold can be found in every environment, both indoors and outside.

Molds are known producers of allergens and irritants. Mold exposure can negatively affect the eyes, skin, nose, throat, and respiratory systems in people with mold allergies and may spur asthma attacks for those with asthma. According to the Center for Disease Control (CDC), if mold is identified on materials, appropriate remediation guidelines with proper containment should be used to minimize exposure to building occupants. Taking measures to limit mold in the first place can raise indoor environmental quality and improve building occupant health and wellbeing.

 

How Mold Infiltrates Buildings

Building materials that remain wet for more than 48 hours, accompanied by moderate indoor temperatures, create ideal conditions for mold to proliferate. Building materials can become moist through leaking pipes or roofs, rainwater seepage, flooding, uncontrolled high relative humidity, and construction practices that don’t properly protect building materials from the elements.

While water intrusion may be easily identified on some interior surfaces, other building materials, such as wood members and wood framing hidden behind finish materials, may harbour undetected mold. Eventually, mold can eat away at building materials, affecting their look and smell. It can rot wood members and impact the structural integrity of wood-framed buildings.

ILSF frame can combat this slow destruction because steel is not organic matter. That makes it an unappealing surface for mold to establish itself and grow.

In addition, LSF won’t warp or sag. Other materials may “creep” over time, twisting, expanding, or contracting with moisture content. These changes can loosen the building frame or allow cracks to develop. When this happens, doors and windows may no longer close properly, which can allow moisture inside. Using CFS, which remains straight and true, can minimize this issue.

Why Mold is a Concern Even in New Buildings

Leaks and aging water-barrier measures are commonly associated with older buildings, but more modern changes in building codes and development practices have provided places for mold to grow, too. Energy efficiency measures, introduced to the construction market in the 1970s, demand building envelopes that are more tightly sealed. Because low ventilation rates don’t provide adequate air circulation and condensation control in these tightly sealed buildings, moisture vapor indoors can become concentrated and create breeding grounds for mold.

In addition, climatic events such as floods, hurricanes, and droughts are frequently associated with extreme temperatures, and these severe environmental changes can lead to mold and envelope degradation in newer buildings.

Even the progressive approach of green building design and construction does not guarantee that buildings are immune to mold. In 2015, it was discovered that the state-of-the-art Mark Twain Museum in Hartford, Connecticut, suffered from mold infestation, despite being the nation’s first LEED (Leadership in Energy and Environmental Design)-certified museum in 2003.

In fact, some debate that certain sustainable practices such as the use of newer, unproven materials can create conditions that allow moisture infiltration to wreak havoc. And in regions of high heat and humidity, the movement to increase ventilation by bringing more outdoor air into a building directly correlates to moisture problems during humid summers.

Preventing all moisture intrusion is virtually impossible regardless of whether buildings are old or new, but LSF can help lessen buildings’ vulnerability to moldVentilation can be efficiently built into the design of LSF-framed buildings, and energy efficiency is maintained or increased due to its inorganic properties. In addition, moisture cannot seep into LSF members, offering additional protection against mold growth.

Left to thrive, mold can result in long-term issues that are expensive to repair, impact occupant wellbeing, and even lead to structural deterioration. Thanks to its high resistance to mold, LSF is an excellent choice to construct a durable, long-lasting building.

If have an upcoming multi-family or non-residential project, we offer complimentary project assistance to help you determine if LSF is the right choice for your building. Just reach out, and a BuildSteel expert will contact you directly.

Leave a Reply

Your email address will not be published. Required fields are marked *